With the programming card we offer you an easy to use
programming unit which allows you to change every single
function of our ProgCard II compatible ESC’s. A special feature
is the exact cutoff voltage adjustment for the two Lithium
batteries types on the market with their respective number of
cells. Further can be adjusted the timing, different brake
modes, the governor speed regulation and the accurate
throttle stick positions by means of buttons. The actual settings
can be read back with all our BEC ESC’s and our Optocoupler
ESC’s from V4. All other Optocoupler ESC’s the setting can be
seen only at programming time. A later read back is not
possible because of the optical separation, also the power
supply has to be provided by the patch cable.
In addition to the LED matrix overview, the confirmation of the
respective programming step is done via an acoustic signal,
which is produced by the motor connected to the ESC.
All this is possible without the otherwise usual stick
programming.